Arduino Mega. Контроллер теплицы. Хроники - 3.0

РЕКЛАМА НА ФОРУМХАУС

Опять не полный лог: меня интересует полностью, включая ответы ERROR модема. Надо понять, какую длину к отсылке прошивка сейчас выдаёт.

 

Сори! Сейчас исправлюсь

 

=> Send the "AT+CGMM" command to modem...
<= Receive "M590" answer from modem...
<= Receive "OK" answer from modem...
[OK] => Modem hardware detected: Neoway M590
Check for modem READY...
=> Send the "AT+CPAS" command to modem...
<= Receive "+CPAS: 0" answer from modem...
[OK] => Modem ready.
<= Receive "OK" answer from modem...
Disable echo...
=> Send the "ATE0" command to modem...
<= Receive "OK" answer from modem...
[OK] => ECHO OFF processed.
Disable cell broadcast SMS...
=> Send the "AT+CSCB=1" command to modem...
<= Receive "OK" answer from modem...
[OK] => Broadcast SMS disabled.
Turn AON ON...
=> Send the "AT+CLIP=1" command to modem...
<= Receive "OK" answer from modem...
[OK] => AON is ON.
Set PDU format...
=> Send the "AT+CMGF=0" command to modem...
<= Receive "OK" answer from modem...
[OK] => PDU format is set.
Set UCS2 format...
=> Send the "AT+CSCS="UCS2" command to modem...
<= Receive "OK" answer from modem...
[OK] => UCS2 encoding is set.
Set SMS output mode...
=> Send the "AT+CNMI=2,2" command to modem...
<= Receive "OK" answer from modem...
[OK] => SMS settings is set.
Check registration status...
=> Send the "AT+CREG?" command to modem...
<= Receive "+CREG: 0,1" answer from modem...
[OK] => Modem registered in GSM!
<= Receive "OK" answer from modem...
<= Receive "+CMT: ,21" answer from modem...
<= Receive "07919730071111F1240B919720258481F100007150300252940402A31A" answer from modem...
SMS RECEIVED: 07919730071111F1240B919720258481F100007150300252940402A31A
Phone number is OK, continue...
BALANCE command found, execute it...
Request balance...
=> Send the "AT+CUSD=1,"002A0031003000320023" command to modem...
<= Receive "+CUSD: 0,"003100380035002E0035003000200440002E000A00390020041C0430044F003A002004380434043504380020043F043E04370434044004300432043B0435043D043804390020043D0430002004140435043D044C0020041F043E043104350434044B0021002000370434043D002E0020043104350441043F043B002E00210020041F043E0434043A043B002E003A0020002A0035003000330023",72" answer from modem...
BALANCE RECEIVED, PARSE...
CUSD IS: 003100380035002E0035003000200440002E000A00390020041C0430044F003A002004380434043504380020043F043E04370434044004300432043B0435043D043804390020043D0430002004140435043D044C0020041F043E043104350434044B0021002000370434043D002E0020043104350441043F043B002E00210020041F043E0434043A043B002E003A0020002A0035003000330023
Send balance to master...
Send SMS: 003100380035002E0035003000200440002E000A00390020041C0430044F003A002004380434043504380020043F043E04370434044004300432043B0435043D043804390020043D0430002004140435043D044C0020041F043E043104350434044B0021002000370434043D002E0020043104350441043F043B002E00210020041F043E0434043A043B002E003A0020002A0035003000330023
recipient: 0B919720258481F1
bytes processed: 70
message: 003100380035002E0035003000200440002E000A00390020041C0430044F003A002004380434043504380020043F043E04370434044004300432043B0435043D043804390020043D0430002004140435043D044C0020041F043E043104350434044B0021002000370434043D002E0020043104350441043F043B002E00210020041F043E0434043A043B002E03A0020002A0035003000330023
completeMessage: 0001000B919720258481F100188C003100380035002E0035003000200440002E000A00390020041C0430044F003A002004380434043504380020043F043E04370434044004300432043B0435043D043804390020043D0430002004140435043D044C0020041F043E043104350434044B0021002000370434043D002E0020043104350441043F043B002E00210020041F043E0434043A043B002E
hlen: 153
commandToSend = AT+CMGS=153
SMS message length = 153
SMS to send = 0001000B919720258481F100188C003100380035002E0035003000200440002E000A00390020041C0430044F003A002004380434043504380020043F043E04370434044004300432043B0435043D043804390020043D0430002004140435043D044C0020041F043E043104350434044B0021002000370434043D002E0020043104350441043F043B002E00210020041F043E0434043A043B002E
<= Receive "OK" answer from modem...
Start SMS sending...
=> Send the "AT+CMGS=153" command to modem...
<= Receive ">" answer from modem...
[OK] => Welcome received, continue sending...
Start sending SMS data...
=> Send the "0001000B919720258481F100188C003100380035002E0035003000200440002E000A00390020041C0430044F003A002004380434043504380020043F043E04370434044004300432043B0435043D043804390020043D0430002004140435043D044C0020041F043E043104350434044B0021002000370434043D002E0020043104350441043F043B002E00210020041F043E0434043A043B002E" command to modem...
<= Receive " " answer from modem...
<= Receive "> " answer from modem...
<= Receive "ERROR" answer from modem...
[OK] => SMS sent.
SMS clearance...
=> Send the "AT+CMGD=1,4" command to modem...
<= Receive "ERROR" answer from modem...
[OK] => saved SMS cleared.

 

Так, длину обрезанного сообщения считает правильно, однако, всё равно выдаёт ошибку. Попробуйте заменить 70 на 65, скажем, в #define ONE_SMS_MAXLENGTH

Т. е. строка

должна выглядеть как

СМС статистики, кстати, отправляет, в связи с последними изменениями? Если не затруднит, сделайте следующее:

1. Сперва запросите статистику;
2. Потом - баланс.

И весь лог - сюда. Не понимаю, почему не хочет отправлять сообщение о балансе, хоть убей.

 

Поменя на 65. Баланс не отправляет, статистику тоже
0�:BGREADY, Mon 01.01.2000 - 01:01:59
Request for modem hardware...
=> Send the "AT+CGMM" command to modem...
<= Receive "M590" answer from modem...
<= Receive "OK" answer from modem...
[OK] => Modem hardware detected: Neoway M590
Check for modem READY...
=> Send the "AT+CPAS" command to modem...
<= Receive "+CPAS: 0" answer from modem...
[OK] => Modem ready.
<= Receive "OK" answer from modem...
Disable echo...
=> Send the "ATE0" command to modem...
<= Receive "OK" answer from modem...
[OK] => ECHO OFF processed.
Disable cell broadcast SMS...
=> Send the "AT+CSCB=1" command to modem...
<= Receive "OK" answer from modem...
[OK] => Broadcast SMS disabled.
Turn AON ON...
=> Send the "AT+CLIP=1" command to modem...
<= Receive "OK" answer from modem...
[OK] => AON is ON.
Set PDU format...
=> Send the "AT+CMGF=0" command to modem...
<= Receive "OK" answer from modem...
[OK] => PDU format is set.
Set UCS2 format...
=> Send the "AT+CSCS="UCS2" command to modem...
<= Receive "OK" answer from modem...
[OK] => UCS2 encoding is set.
Set SMS output mode...
=> Send the "AT+CNMI=2,2" command to modem...
<= Receive "OK" answer from modem...
[OK] => SMS settings is set.
Check registration status...
=> Send the "AT+CREG?" command to modem...
<= Receive "+CREG: 0,1" answer from modem...
[OK] => Modem registered in GSM!
<= Receive "OK" answer from modem...
<= Receive "+CMT: ,21" answer from modem...
<= Receive "07919730071111F1240B919720258481F100007150300253210402A31C" answer from modem...
SMS RECEIVED: 07919730071111F1240B919720258481F100007150300253210402A31C
Phone number is OK, continue...
STAT command found, execute it...
Try to send stat SMS to +79025248181...
Command CTGET=STATE|WINDOW|0 parsed, execute it...
Receive answer from STATE: WINDOW|0|CLOSING
Command CTGET=WATER parsed, execute it...
Send SMS: Тв��: 25,18
Тнар: 25,00
Ок��а: закр
Полив: вы��л
recipient: 0B919720258481F1
bytes processed: 48
message: 04220432043D003A002000320035002C00310038000D000A0422043D04300440003A002000320035002C00300030000D000A041E043A043D0430003A002004370430043A0440000D000A041F043E043B04380432003A00200432044B043A043B
completeMessage: 0001000B919720258481F100186004220432043D003A002000320035002C00310038000D000A0422043D04300440003A002000320035002C00300030000D000A041E043A043D0430003A002004370430043A0440000D000A041F043E043B04380432003A00200432044B043A043B
hlen: 225
commandToSend = AT+CMGS=225
SMS message length = 225
SMS to send = 0001000B919720258481F100186004220432043D003A002000320035002C00310038000D000A0422043D04300440003A002000320035002C00300030000D000A041E043A043D0430003A002004370430043A0440000D000A041F043E043B04380432003A00200432044B043A043B
Start SMS sending...
=> Send the "AT+CMGS=225" command to modem...
<= Receive ">" answer from modem...
[OK] => Welcome received, continue sending...
Start sending SMS data...
=> Send the "0001000B919720258481F100186004220432043D003A002000320035002C00310038000D000A0422043D04300440003A002000320035002C00300030000D000A041E043A043D0430003A002004370430043A0440000D000A041F043E043B04380432003A00200432044B043A043B" command to modem...
<= Receive " " answer from modem...
<= Receive "> " answer from modem...
<= Receive "ERROR" answer from modem...
[OK] => SMS sent.
SMS clearance...
=> Send the "AT+CMGD=1,4" command to modem...
<= Receive "OK" answer from modem...
[OK] => saved SMS cleared.
<= Receive "+CMT: ,21" answer from modem...
<= Receive "07919730071111F1240B919720258481F100007150300253540402A31A" answer from modem...
SMS RECEIVED: 07919730071111F1240B919720258481F100007150300253540402A31A
Phone number is OK, continue...
BALANCE command found, execute it...
Request balance...
=> Send the "AT+CUSD=1,"002A0031003000320023" command to modem...
<= Receive "+CUSD: 0,"003100380035002E0035003000200440002E000A00390020041C0430044F003A002004380434043504380020043F043E04370434044004300432043B0435043D043804390020043D0430002004140435043D044C0020041F043E043104350434044B0021002000370434043D002E0020043104350441043F043B002E00210020041F043E0434043A043B002E003A0020002A0035003000330023",72" answer from modem...
BALANCE RECEIVED, PARSE...
CUSD IS: 003100380035002E0035003000200440002E000A00390020041C0430044F003A002004380434043504380020043F043E04370434044004300432043B0435043D043804390020043D0430002004140435043D044C0020041F043E043104350434044B0021002000370434043D002E0020043104350441043F043B002E00210020041F043E0434043A043B002E003A0020002A0035003000330023
Send balance to master...
Send SMS: 003100380035002E0035003000200440002E000A00390020041C0430044F003A002004380434043504380020043F043E04370434044004300432043B0435043D043804390020043D0430002004140435043D044C0020041F043E043104350434044B0021002000370434043D002E0020043104350441043F043B002E00210020041F043E0434043A043B002E003A0020002A0035003000330023
recipient: 0B919720258481F1
bytes processed: 65
message: 003100380035002E0035003000200440002E000A00390020041C0430044F003A002004380434043504380020043F043E04370434044004300432043B0435043D043804390020043D0430002004140435043D044C0020041F043E043104350434044B0021002000370434043D002E0020043104350441043F043B002E00210020041F43E0434043A043B002E003A0020002A0035003000330023
completeMessage: 0001000B919720258481F1001882003100380035002E0035003000200440002E000A00390020041C0430044F003A002004380434043504380020043F043E04370434044004300432043B0435043D043804390020043D0430002004140435043D044C0020041F043E043104350434044B0021002000370434043D002E0020043104350441043F043B002E00210020041F02A0035003000330023
hlen: 143
commandToSend = AT+CMGS=143
SMS message length = 143
SMS to send = 0001000B919720258481F1001882003100380035002E0035003000200440002E000A00390020041C0430044F003A002004380434043504380020043F043E04370434044004300432043B0435043D043804390020043D0430002004140435043D044C0020041F043E043104350434044B0021002000370434043D002E0020043104350441043F043B002E00210020041F02A0035003000330023
<= Receive "OK" answer from modem...
Start SMS sending...
=> Send the "AT+CMGS=143" command to modem...
<= Receive ">" answer from modem...
[OK] => Welcome received, continue sending...
Start sending SMS data...
=> Send the "0001000B919720258481F1001882003100380035002E0035003000200440002E000A00390020041C0430044F003A002004380434043504380020043F043E04370434044004300432043B0435043D043804390020043D0430002004140435043D044C0020041F043E043104350434044B0021002000370434043D002E0020043104350441043F043B002E00210020041F02A0035003000330023" command to modem...
<= Receive " " answer from modem...
<= Receive "> " answer from modem...
<= Receive "ERROR" answer from modem...
[OK] => SMS sent.
SMS clearance...
=> Send the "AT+CMGD=1,4" command to modem...
<= Receive "ERROR" answer from modem...
[OK] => saved SMS cleared.

 

При длине 70, увы тоже самое: статистика теперь тоже не отправляется

 

Ок, буду разбираться, в чём там дело.

 

@Viktorovich4232, подключил SIM800L - блин, работает всё. Буду рыть.

 

@Viktorovich4232, вижу, что и у мну обрезается неверно - поставил 50 символов. Ищу, в чём дело.

 

@Viktorovich4232, перекачайте с гитхаба файл PDUClasses. cpp - заработало у меня на SIM800L - и обрезает СМС о балансе (тестировал на 50 символах, на гитхабе оставил 70), и СМС статистики посылает.

Надо тестировать Строковой класс в Arduino не очень прозрачный - при записывании нуль-терминатора '\0' по центру строки он не пересчитывает длину строки, хотя - должен, как по мне. Поэтому, при использовании метода length - можно получить не актуальную длину строки до нуль-терминатора Вопрос архитектуры, и очень спорный - с одной стороны, класс предоставляет метод setCharAt, в котором позволяет загнать символ окончания строки в любое место. С другой стороны - класс разработан тупо как буфер, чтобы держал любой набор символов. Короче - идеология

Пробуйте. И отпишитесь по результатам, плз.

З. Ы. Код пока туповат, буду оптимизировать - там с памятью опять пляски

Правка: пока не спешите особо - я тестирую: много тонких моментов

 

Больной скорее мертв чем жив
Request for modem hardware...
=> Send the "AT+CGMM" command to modem...
<= Receive "M590" answer from modem...
<= Receive "OK" answer from modem...
[OK] => Modem hardware detected: Neoway M590
Check for modem READY...
=> Send the "AT+CPAS" command to modem...
<= Receive "+CPAS: 0" answer from modem...
[OK] => Modem ready.
<= Receive "OK" answer from modem...
Disable echo...
=> Send the "ATE0" command to modem...
<= Receive "OK" answer from modem...
[OK] => ECHO OFF processed.
Disable cell broadcast SMS...
=> Send the "AT+CSCB=1" command to modem...
<= Receive "OK" answer from modem...
[OK] => Broadcast SMS disabled.
Turn AON ON...
=> Send the "AT+CLIP=1" command to modem...
<= Receive "OK" answer from modem...
[OK] => AON is ON.
Set PDU format...
=> Send the "AT+CMGF=0" command to modem...
<= Receive "OK" answer from modem...
[OK] => PDU format is set.
Set UCS2 format...
=> Send the "AT+CSCS="UCS2" command to modem...
<= Receive "OK" answer from modem...
[OK] => UCS2 encoding is set.
Set SMS output mode...
=> Send the "AT+CNMI=2,2" command to modem...
<= Receive "OK" answer from modem...
[OK] => SMS settings is set.
Check registration status...
=> Send the "AT+CREG?" command to modem...
<= Receive "+CREG: 0,1" answer from modem...
[OK] => Modem registered in GSM!
<= Receive "OK" answer from modem...
<= Receive "+CMT: ,21" answer from modem...
<= Receive "07919730071111F1240B919720258481F100007150301235940402A31A" answer from modem...
SMS RECEIVED: 07919730071111F1240B919720258481F100007150301235940402A31A
Phone number is OK, continue...
BALANCE command found, execute it...
Request balance...
=> Send the "AT+CUSD=1,"002A0031003000320023" command to modem...
<= Receive "+CUSD: 0,"003100380035002E0035003000200440002E000A00390020041C0430044F003A002004380434043504380020043F043E04370434044004300432043B0435043D043804390020043D0430002004140435043D044C0020041F043E043104350434044B0021002000370434043D002E0020043104350441043F043B002E00210020041F043E0434043A043B002E003A0020002A0035003000330023",72" answer from modem...
BALANCE RECEIVED, PARSE...
CUSD IS: 003100380035002E0035003000200440002E000A00390020041C0430044F003A002004380434043504380020043F043E04370434044004300432043B0435043D043804390020043D0430002004140435043D044C0020041F043E043104350434044B0021002000370434043D002E0020043104350441043F043B002E00210020041F043E0434043A043B002E003A0020002A0035003000330023
Send balance to master...
Send SMS: 003100380035002E0035003000200440002E000A00390020041C0430044F003A002004380434043504380020043F043E04370434044004300432043B0435043D043804390020043D0430002004140435043D044C0020041F043E043104350434044B0021002000370434043D002E0020043104350441043F043B002E00210020041F043E0434043A043B002E003A0020002A0035003000330023
recipient: 0B919720258481F1
bytes processed: 70
message: 003100380035002E0035003000200440002E000A00390020041C0430044F003A002004380434043504380020043F043E04370434044004300432043B0435043D043804390020043D0430002004140435043D044C0020041F043E043104350434044B0021002000370434043D002E0020043104350441043F043B002E00210020041F043E0434043A043B002E03A0020002A0035003000330023
completeMessage: 0001000B919720258481F100188C003100380035002E0035003000200440002E000A00390020041C0430044F003A002004380434043504380020043F043E04370434044004300432043B0435043D043804390020043D0430002004140435043D044C0020041F043E043104350434044B0021002000370434043D002E0020043104350441043F043B002E00210020041F043E0434043A043B002E
hlen: 153
commandToSend = AT+CMGS=153
SMS message length = 153
SMS to send = 0001000B919720258481F100188C003100380035002E0035003000200440002E000A00390020041C0430044F003A002004380434043504380020043F043E04370434044004300432043B0435043D043804390020043D0430002004140435043D044C0020041F043E043104350434044B0021002000370434043D002E0020043104350441043F043B002E00210020041F043E0434043A043B002E
<= Receive "OK" answer from modem...
Start SMS sending...
=> Send the "AT+CMGS=153" command to modem...
<= Receive ">" answer from modem...
[OK] => Welcome received, continue sending...
Start sending SMS data...
=> Send the "0001000B919720258481F100188C003100380035002E0035003000200440002E000A00390020041C0430044F003A002004380434043504380020043F043E04370434044004300432043B0435043D043804390020043D0430002004140435043D044C0020041F043E043104350434044B0021002000370434043D002E0020043104350441043F043B002E00210020041F043E0434043A043B002E" command to modem...
<= Receive " " answer from modem...
<= Receive "> " answer from modem...
<= Receive "ERROR" answer from modem...
[OK] => SMS sent.
SMS clearance...
=> Send the "AT+CMGD=1,4" command to modem...
<= Receive "ERROR" answer from modem...
[OK] => saved SMS cleared.
<= Receive "+CMT: ,21" answer from modem...
<= Receive "07919730071111F1240B919720258481F100007150301245020402A31C" answer from modem...
SMS RECEIVED: 07919730071111F1240B919720258481F100007150301245020402A31C
Phone number is OK, continue...
STAT command found, execute it...
Try to send stat SMS to +7902XXXXXXX...
Command CTGET=STATE|WINDOW|0 parsed, execute it...
Receive answer from STATE: WINDOW|0|CLOSED
Command CTGET=WATER parsed, execute it...
Send SMS: Твн: 24,81
Тнар: 24,68
Окна: закр
Полив: выкл
recipient: 0B919720258481F1
bytes processed: 48
message: 04220432043D003A002000320034002C00380031000D000A0422043D04300440003A002000320034002C00360038000D000A041E043A043D0430003A002004370430043A0440000D000A041F043E043B04380432003A00200432044B043A043B
completeMessage: 0001000B919720258481F100186004220432043D003A002000320034002C00380031000D000A0422043D04300440003A002000320034002C00360038000D000A041E043A043D0430003A002004370430043A0440000D000A041F043E043B04380432003A00200432044B043A043B
hlen: 118
commandToSend = AT+CMGS=118
SMS message length = 118
SMS to send = 0001000B919720258481F100186004220432043D003A002000320034002C00380031000D000A0422043D04300440003A002000320034002C00360038000D000A041E043A043D0430003A002004370430043A0440000D000A041F043E043B04380432003A00200432044B043A043B
Start SMS sending...
=> Send the "AT+CMGS=118" command to modem...
<= Receive ">" answer from modem...
[OK] => Welcome received, continue sending...
Start sending SMS data...
=> Send the "0001000B919720258481F100186004220432043D003A002000320034002C00380031000D000A0422043D04300440003A002000320034002C00360038000D000A041E043A043D0430003A002004370430043A0440000D000A041F043E043B04380432003A00200432044B043A043B" command to modem...
<= Receive " " answer from modem...
<= Receive "> " answer from modem...
<= Receive "ERROR" answer from modem...
[OK] => SMS sent.
SMS clearance...
=> Send the "AT+CMGD=1,4" command to modem...
<= Receive "OK" answer from modem...
[OK] => saved SMS cleared.
Check if modem available...
=> Send the "AT" command to modem...
<= Receive "OK" answer from modem...
[OK] => Modem answered and available.

 

Ничо, оживим Я сейчас как раз этим занимаюсь. Логов пока больше не надо - я отпишу, как будет результат.

 

@Viktorovich4232, перекачивайте с гитхаба - перепилил код, несколько раз пробовал вперемешку и баланс, и статистику - всё отсылает. Достаточно заменить PDUClasses. cpp. Когда меняете - лучше закрывать Arduino IDE, на всякий.

 

Заработало

 

@DIYMan, вопрос по UniversalSensorsModule:
если к Меге не подсоединены датчики влажности, то в Globals. h пишем /-#define USE_HUMIDITY_MODULE. Но такой датчик есть в UniversalSensorsModule - будут ли его значения в конфигураторе?